Germany "ABISOFIX" Original Imported Paint Stripping Machine Housing
Published:2026-10-25
Views:0
Germany "ABISOFIX" Original Imported Paint Stripping Machine Housing consists of two independent parts: the stripping machine body and the speed regulator. Compact and flexible to operate, it is specially designed for the coil and electrical appliance manufacturing industries. The body consists of an electric motor and a stripping blade. The blade has three independent hard blades that thoroughly remove any hard insulating varnish, enamel paint, ML, Lsonel, etc. on the wire surface without damaging the copper wire itself. Without serious pollution or hazards, the stripping work is fast and safe. The ZHX-4510 stripping machine is equipped with three different models of blades for different wire diameters.
Specifications:
Machine Model
ZHX-4510
Applicable Wire Diameter
0.2~4.5mm
Machine Dimensions
178x
Product Name: Germany "ABISOFIX" Original Imported Paint Stripping Machine Housing
Model: ZHX-4510
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836
Germany "ABISOFIX" Original Imported Paint Stripping Machine Housing

Germany "ABISOFIX" Original Imported Paint Stripping Machine Housing consists of two independent parts: the stripping machine body and the speed regulator. Compact and flexible to operate, it is specially designed for the coil and electrical appliance manufacturing industries. The body consists of an electric motor and a stripping blade. The blade has three independent hard blades that thoroughly remove any hard insulating varnish, enamel paint, ML, Lsonel, etc. on the wire surface without damaging the copper wire itself. Without serious pollution or hazards, the stripping work is fast and safe. The ZHX-4510 stripping machine is equipped with three different models of blades for different wire diameters.
Specifications:
Machine Model | ZHX-4510 | Applicable Wire Diameter | 0.2~4.5mm |
Machine Dimensions | 178x115x55mm | Voltage | 220v/50Hz |
Motor Power | 25w | Speed | 0-8000r/min |
Machine Weight | 1.8kg | Optional Accessories | Three-Jaw Blade |
Stripping Length | 2-50mm | | |
Installation & Use
Insert the enameled wire into the center of the blade holder and press the start switch; the motor starts immediately. Slowly pull the wire out of the blade holder and the stripping is complete.
Depending on the wire diameter, adjust the blade speed: the thinner the wire, the lower the speed; the thicker the wire, the higher the speed.