ZHX-7A Enameled Wire Paint Scraper|Enameled Wire Paint Remover
Published:2026-10-25
Views:0
The DNB-7A enameled wire paint scraping machine with speed adjustment can be fixed on a workbench. It consists of a single-phase series motor, a paint stripping blade holder, a foot pedal and a speed governor. It can conveniently and quickly strip various insulating paint films on the surface of enameled wire without damaging its base. It is an essential tool for the production of motors, electrical appliances, instruments, radio, household appliances industries and for maintenance work. It is superior to paint removal methods such as manual knife scraping, grinding wheel grinding, fire burning and chemical corrosion. It not only greatly improves wire welding efficiency, but also significantly improves welding quality.
Product Name: ZHX-7A Fixed Paint Scraper|Enameled Wire Paint Remover
Product Model: ZHX-7A
Tel: 0757-26397858 Mr. Huang 13620805836
ZHX-7A Fixed Paint Scraper|Enameled Wire Paint Remover

DNB-7A Enameled Wire Paint Scraping Machine with Speed Adjustment can be fixed on a workbench. It consists of a single-phase series motor, a paint stripping blade holder, a foot pedal and a speed governor. It can conveniently and quickly strip various insulating paint films on the surface of enameled wire without damaging its base. It is an essential tool for the production of motors, electrical appliances, instruments, radio, household appliances industries and for maintenance work. It is superior to paint removal methods such as manual knife scraping, grinding wheel grinding, fire burning and chemical corrosion. It not only greatly improves wire welding efficiency, but also significantly improves welding quality. Note: (with speed governor)Specifications
| Machine Model | ZHX-7A | Applicable Wire Diameter | 0.35-4.0mm |
| Machine Size | 180X110X100mm | Operating Voltage | 220v/50Hz |
| Motor Power | 75w | Speed | 0-10000r/min |
| Machine Weight | 1.5kg | Optional Accessories | Three-Claw Cutter Head |
| Stripping Length | 2-38mm | Brand | Foshan Zhenxing |
Installation and Use
Fix the paint stripping machine on the workbench. Insert the enameled wire into the center of the blade holder, step on the start switch, and the motor starts rotating immediately. Slowly pull the enameled wire out of the blade holder, and the paint stripping work is completed. According to the thickness of the enameled wire diameter, adjust the blade speed by controlling the speed governor: the thinner the wire diameter, the lower the speed required; the thicker the wire diameter, the faster the speed should be adjusted.