Product Name: ZHX-550Enameled Wire Stripping Machine|Enameled Wire Paint Stripping Machine
Product Model: ZHX-550
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836
ZHX-550Enameled Wire Paint Scraping Machine|Enameled Wire Paint Removing Machine
ZHX-550 Enameled Wire Stripping Machine | Enameled Wire Paint Scraping Machine adopts the currently advanced electric paint scraping technology from Taiwan. It can adjust the paint scraping length and adapt to enameled wires of various specifications. It is convenient and flexible to use, can quickly scrape off the insulating paint film of enameled wires, removes dirt cleanly, and leaves a smooth surface. With superior performance, it completely replaces traditional paint removal methods such as manual knife scraping, grinding wheel and sandpaper grinding, and chemical corrosion. It not only greatly improves work efficiency, but also has strong solderability. It is ideal enameled wire paint scraping equipment for coil manufacturing and maintenance industries such as motors, electrical appliances, instruments, transformers, electronics, household appliances and power tools. It integrates an electronic stepless speed regulator, an electric motor and a paint scraping blade, and adopts a light and durable micro switch. It has the characteristics of fast paint scraping speed, high efficiency, simple operation, stable performance, low failure rate and novel and practical design. (Twisted wires can also be stripped quickly and cleanly without breaking the wire.)
Specifications
| Machine Model | ZHX-550 | Applicable Wire Diameter | 0.30-4.50mm |
| Machine Dimensions | 255X55mm | Operating Voltage | 220v/50Hz |
| Motor Power | 120w | Rotation Speed | 0-2400r/min |
| Speed Adjustment | Stepless Speed Regulation | Optional Accessories | Tungsten Alloy Blade |
| Stripping Length | 2-50mm | Brand | Foshan Zhenxing |
Installation and Use
Insert the enameled wire into the center of the cutter holder and press the start switch; the motor starts rotating immediately. Slowly pull the enameled wire out of the cutter holder, and the paint stripping work is complete.According to the different diameters of the enameled wire, adjust the rotation speed of the blade: the thinner the wire, the lower the speed required; the thicker the wire, the faster the speed should be set.