Welcome to Foshan Huang Zhenxing Hardware & Electronic Equipment official website!
Product Detail

ABISOFIX Enameled Wire Stripping Machine|Electric Paint Scraping Machine

ABISOFIX Enameled Wire Stripping Machine|Electric Paint Scraping Machine

ABISOFIX Enameled Wire Stripping Machine|Electric Paint Scraping Machine

Published:2026-10-25 Views:0

The ZHX-4510 enameled wire paint scraping machine / electric wire stripping machine is originally imported from Germany "ABISOFIX". It consists of two independent parts: the stripping machine body and the speed regulator. The model is light and flexible to operate, and is specially designed for manufacturing coil electrical appliances and other industries.

Product Details

Product Name: ABISOFIX Enameled Wire Stripping Machine|Electric Paint Scraping Machine

Product Model: ZHX-4510
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836

ABISOFIX Enameled Wire Stripping Machine|Electric Paint Scraping Machine

The ABISOFIX enameled wire stripping machine | electric paint scraping machine consists of two independent parts: the stripping machine body and the speed regulator. The model is light and flexible to operate, and is specially designed for manufacturing coil electrical appliances and other industries. The machine body consists of an electric motor and a paint stripping cutter head. The cutter head has three independent hard blades, which can thoroughly remove any hard insulating paint, enamel paint, ML, Lsonel, etc. on the wire surface without damaging the copper wire itself. In the absence of serious pollution and hazards, the paint stripping work is fast and safe. The ZHX-4510 stripping machine is equipped with three different types of cutter heads for different wire diameters.

Specifications:
Machine Model
ZHX-4510
Applicable Wire Diameter
0.2~4.5mm
Machine Dimensions
178x115x55mm
Operating Voltage
220v/50Hz
Motor Power
25w
Rotation Speed
0-8000r/min
Machine Weight
1.8kg
Optional Accessories
Three-jaw Cutter Head
Stripping Length
2-50mm
 
 
Installation and Use
 
     Insert the enameled wire into the center of the cutter holder and press the start switch; the motor starts rotating immediately. Slowly pull the enameled wire out of the cutter holder, and the paint stripping work is complete.
 
     According to the different diameters of the enameled wire, adjust the rotation speed of the blade: the thinner the wire, the lower the speed required; the thicker the wire, the faster the speed should be set.

 


Related Products
Hotline
0757-26397858
Mr. Huang 13620805836
WeChat
13620805836
QQ
81698859
Call Us SMS Contact Us