Welcome to Foshan Huang Zhenxing Hardware & Electronic Equipment official website!
Product Detail

ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

Published:2026-10-25 Views:0

The ZHX--8 enameled wire paint scraping machine / handheld paint scraper adopts the currently internationally advanced electric paint scraping technology. The whole machine integrates an electronic stepless speed regulator, a single-phase series-excited motor and a paint scraping blade, and adopts a light and durable micro jog switch and a spin-pressing carbon brush device.

Product Details

Product Name: ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

Product Model: ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

Consultation Hotline: 0757-26397858 Mr. Huang 13620805836

ZHX-340D Enameled Wire Paint Scraping Machine|Enameled Wire Stripping Machine

The DNB-6D high-performance enameled wire paint removing machine adopts the latest designed extra-hard material high-speed diamond-inlaid (alloy) paint stripping cutter head, durable, can thoroughly remove any hard insulating paint, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. It is especially suitable for situations where paint needs to be stripped down to the bottom of the coil. It is easy to operate and has excellent results. The DNB-6D enameled wire paint removing machine is equipped with a stripping length stop device, which can accurately control the stripping length of the enameled wire. In the absence of serious pollution and hazards, the paint stripping work is fast and safe.

      Specifications  

 

Machine Model
ZHX-340D
Applicable Wire Diameter
0.35-6.50mm
Machine Dimensions
270 x 165 x 170mm
Operating Voltage
220v/50Hz
Motor Power
120w
Rotation Speed
2800r/min
Machine Weight
6.8kg
Optional Accessories
Cylindrical Cutter Head / Conical Cutter Head
Stripping Length
4-70mm
Manufacturer
Foshan Zhenxing

 

      Installation and Use 
 
      Select a suitable cutter head and install it on the chuck at the front end of the machine. Insert an enameled wire into the middle of the cutter head, use a fixing wrench to adjust the chuck so that the cutter head gently clamps the enameled wire, then withdraw the enameled wire. After activating the switch, hold the coil part by hand and gently push the enameled wire into the high-speed rotating cutter head until it reaches the preset stripping length, then carefully withdraw the enameled wire, and the paint stripping work is complete. When necessary, you can adjust the diameter of the cutter head by loosening and tightening the chuck to achieve the ideal stripping effect. Because when the machine is running and the cutter head rotates at high speed, the insulating paint or oxide of the enameled wire is scraped off, and the surface of the stripped enameled wire is bright and clean.    

       To set the required stripping length, loosen the fixing screw of the chuck and withdraw the chuck to see the limit pin for the stripping length. Adjust the limit pin through the fixing screw to set and control the stripping length of the enameled wire.  


 

Paint removing machine, enameled wire paint removing machine, paint remover, enameled wire paint remover, fixed paint removing machine, foot-operated paint remover, fixed paint remover, foot-operated paint removing machine, paint removing cutter head, paint scraping machine, enameled wire paint scraping machine, handheld paint scraping machine, paint scraper, handheld paint scraper, enameled wire paint scraper, paint scraping cutter head, three-jaw paint scraping cutter head, electric paint scraping machine


Related Products
Hotline
0757-26397858
Mr. Huang 13620805836
WeChat
13620805836
QQ
81698859
Call Us SMS Contact Us