Product Name: ZHX-320 Enameled Wire Paint Stripping Machine
Model: ZHX-320
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836
ZHX-320 Enameled Wire Paint Stripping Machine|Enamel Skin Stripping Machine

ZHX-320 High-Performance Enameled Wire Paint Stripping Machine / Enamel Skin Stripping Machine, uniquely featuring the latest-designed "full-contact" high-speed paint-stripping fiber wheel / paint-stripping steel wire wheel. It automatically adjusts to the curvature of the wire, thoroughly removing any hard insulating varnish, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper(aluminum)wire itself. Without serious pollution or hazards, the stripping work is fast and safe. Suitable wire diameter range: 0.10mm-10mm, suitable for round and square wires, and can process multiple strands of enameled wire simultaneously. Easy to operate with excellent results.
Specifications
Machine Model | ZHX-320 | Applicable Wire Diameter | 0.10-10mm |
Machine Dimensions | 485x305x265mm | Voltage | 220v/50Hz |
Motor Power | 370W--550w | Speed | 3330r/min |
Machine Weight | 23kg | Optional Accessories | Nylon fiber wheel or steel wire wheel |
Belt Size | 730x30x2mm | Stripping Length | 3mm - Unlimited |
Installation & Use
Select a suitable stripping wheel and install it on the machine. Place the enameled wire between the two stripping wheels, adjust the two wheels so the wire is gently clamped, hold the coil by hand, then turn on the switch and test the stripping effect. The desired stripping effect can be achieved by adjusting the contact pressure between the two stripping wheels.
During operation, insert the enameled wire between the two stripping wheels, then gently pull the wire out from between the wheels; the stripping is complete. While the machine is running, the high-speed rotating stripping wheels grind off the insulating varnish or oxides on the wire, leaving the stripped wire surface bright and clean.
If the nylon fiber stripping wheel develops an uneven or bumpy surface during use, it may cause wire breakage or incomplete stripping. In this case the wheel needs dressing: use abrasive cloth to dress and grind the wheel flat until the two wheels make even contact. Regular dressing during use extends the service life of the stripping wheel.
When replacing the stripping wheel, simply pull the worn wheel off the shaft and insert a new one to resume work. (When installing a steel wire stripping wheel, note that the wheel has a direction.)