Welcome to Foshan Huang Zhenxing Hardware & Electronic Equipment official website!
Product Detail

ZHX-340 Enameled Wire Paint Removing Machine|Wire Stripping Machine

ZHX-340 Enameled Wire Paint Removing Machine|Wire Stripping Machine

ZHX-340 Enameled Wire Paint Removing Machine|Wire Stripping Machine

Published:2026-10-25 Views:0

ZHX-340 Enameled Wire Paint Removing Machine | Paint Skin Removing Machine, adopting the latest-designed extra-hard high-speed stripping blade. It thoroughly removes any hard insulating varnish, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for stripping down to the bottom of the coil. Easy to operate with excellent results. The ZHX-340 enameled wire paint removing machine is equipped with a stripping length stop device, which can accurately control the stripping length of the enameled wire. Without serious pollution or hazards, the stripping work is fast and safe.

Product Details

Product Name: ZHX-340 Enameled Wire Paint Removing Machine
Model: ZHX-340
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836ZHX-340 Enameled Wire Paint Removing Machine | Paint Skin Removing Machine

ZHX-340 Enameled Wire Paint Removing Machine | Paint Skin Removing Machine, adopting the latest-designed extra-hard high-speed stripping blade. It thoroughly removes any hard insulating varnish, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for stripping down to the bottom of the coil. Easy to operate with excellent results,ZHX-340The enameled wire paint removing machine is equipped with a stripping length stop device, which can accurately control the stripping length of the enameled wire. Without serious pollution or hazards, the stripping work is fast and safe.

Speci fications 

Machine Model
ZHX-340
Applicable Wire Diameter
0.30-7.00mm
Machine Dimensions
250 x 185 x 180mm
Voltage
220v/50Hz
Motor Power
120w
Speed
2800r/min
Machine Weight
6.8kg
Optional Accessories
Cylindrical Blade
Stripping Length
4-90mm
Brand
Foshan Zhenxing

      Installation & Use 
 
Select a suitable blade and install it on the chuck at the front of the machine. Insert an enameled wire into the center of the blade, use a fixing wrench to adjust the chuck so the blade gently clamps the wire, then withdraw the wire. After activating the switch, hold the coil by hand and gently push the wire into the high-speed rotating blade until it reaches the preset stripping length, then carefully withdraw the wire; the stripping is complete. If necessary, the blade aperture can be adjusted by loosening and tightening the chuck to achieve the desired stripping effect. When the machine runs and the blade rotates at high speed, it scrapes off the insulating varnish or oxides on the wire, leaving the stripped wire surface bright and clean.

To set the required stripping length, loosen the chuck's fixing screw and withdraw the chuck to expose the stripping length limit thimble. Adjust the limit thimble via the fixing screw to set and control the stripping length of the enameled wire. 

Paint Removing Machine, Enameled Wire Paint Removing Machine, Skin Removing Machine, Paint Skin Removing Machine, Enameled Wire Skin Removing Machine, Enameled Wire Paint Skin Removing Machine, Paint Removing Blade


Related Products
Hotline
0757-26397858
Mr. Huang 13620805836
WeChat
13620805836
QQ
81698859
Call Us SMS Contact Us