Product Name: ZHX-340A Enameled Wire Paint Scraper Machine
Model: ZHX-340A
Consultation Hotline: 0757-26397858 Mr. Huang 13620805836
ZHX-340A Four-Jaw Enameled Wire Paint Stripping Machine | Enameled Wire Paint Scraper Machine

ZHX-340AThe Four-Jaw Enameled Wire Paint Stripping Machine | Enameled Wire Paint Scraper Machine is our company's latest newly developed product, manufactured with the newest processing technology and unique design. The blade is made of four extra-hard tungsten steel alloy rods. The cutting edge adopts a centripetal point-cutting and taper-adjustable principle, with a unique design for convenient and fast chip removal. Combined with convenient disassembly, easy adjustment and flexible use of a safety guard, it truly meets users' needs. Since its launch, this product has earned users' trust and praise. In current user practice, it has increased work efficiency by 10 times over the original market Model -6 (standard type) machine (result of operating both machines in the same shift at the user's site). It solves the problem of incomplete one-time stripping for slightly bent wires. This product is currently a reliable and safe ideal product for users.
ZHX-340ANew Model Four-Jaw Enameled Wire Paint Scraper Machine, applicable wire diameter range: (about 0.5—5). It thoroughly removes any hard insulating varnish, enamel paint, ML, lsonel, etc. on the wire surface without damaging the copper wire itself. Especially suitable for stripping down to the bottom of the coil. Easy to operate with excellent results,ZHX-340AThe New Model Four-Jaw Enameled Wire Wire Stripping Machine is equipped with a stripping length stop device, which can accurately control the stripping length of the enameled wire. Without serious pollution or hazards, the stripping work is fast and safe.
ModelZHX-340ANew Model Applicable Wire Diameter about 0.5—5mm
Machine Dimensions 280*250*150mm Voltage 220V/50HZ
Motor Power 120W Motor Speed 2800r/min
Machine Weight 6.5KG Blade Material Made of Hard Tungsten Steel Alloy
Brand Foshan Zhenxing Stripping Length 2mm—90mm
Operation Method: [See the operation example diagram manual for details]
A. Plug in the 220V AC power supply.
B. First remove the guard on the blade part. Adjust the scraping edge according to the required scraping wire diameter; loosen the headless hex socket screws that fix the edge and position it (see the example diagram for details).
C. Turn the adjusting nut (to adjust the size of the scraping edge: clockwise for larger, counterclockwise for smaller). Generally, first adjust the edge slightly larger than the enameled wire diameter, then lock the shank. Hold the wire with one hand and adjust the nut with the other until the edge lightly rubs the wire surface, then tighten all the fixing screws.
D. Adjust and lock the limit pin, then install the guard.
E. Press the power switch and the motor starts running.
F. Hold the enameled wire to be scraped flat and insert it into the feed inlet to start stripping.